Fine Guns | Accessories | Gunsmithing
Patridge Sight for Masterpiece and Classic Banded Ramps. THIS DESIGN TO BE DISCONTINUED - WHILE SUPPLIES LAST Blued solid steel with brass sourdough face. 3/32" / 2.5mm wide. Dovetail is 2mm / .080" Thick, 22mm / .866" Long. 5,3mm / .209" Wide with a 75 degree angle. Overall height is measured from the bottom of the dovetail to the top of the bead. Please note that light fitting maybe required. PLEASE SEE PRODUCT INSTRUCTIONS PAGE FOR "SIGHT INSERT FITTING INSTRUCTIONS".
SIGHT HEIGHT CORRECTION: If you need to correct the point of impact, by changing the front sight, we need to know the following:
1) Distance from the front sight to the rear sight, in inches.
2) The amount of correction needed, in inches @ 25, 50, or 100 yds.
3) The overall height of the existing front sight insert, top to bottom, in thousands of inch.
This information can be emailed to us at info@necgltd.com for calculation and sight height correction suggestions.
