Fine Guns | Accessories | Gunsmithing
"White On White" Folding Night Sight for Masterpiece* and Classic Banded Ramps. This is the updated version of the Traditional Folding Night Sight. This all blued steel sight insert is only available in one height. It has a .256" / 6.5mm high standing 3/32" white bead and a large folding .150" white bead for low light applications. Overall height is measured from the bottom of the dovetail to the top of the bead. Fits Masterpiece and Classic Banded Ramps. Please note that light fitting maybe required. PLEASE SEE PRODUCT INSTRUCTIONS PAGE FOR "SIGHT INSERT FITTING INSTRUCTIONS" R-104-W
*Masterpiece Banded Ramps will require a thumbnail / relief cut at the end of the dovetail opening to access folding sight when down. See 2nd picture.
Fitting Sight Inserts: Use a sheet of 220-320 grit sandpaper on a clean, flat surface. Set the sight down onto the sandpaper. Push the sight back and forth several times, being careful to keep the sight flat on the sandpaper. From time to time try the insert in the dovetail. Repeat as required until the insert slides completely into the dovetail. Tip: From time to time tilt the insert @ 45 degrees to the left and to the right to break the edge of the inserts dovetail. Breaking these edges may be all that is required to fit the insert.
