Fine Guns | Accessories | Gunsmithing
RUGER N-100 PEEP SIGHT. Designed for use with the Ruger #1 and Model 77 the N-100 is machined from solid steel. Supplied with two apertures (.093" & .125") with industry standard 7/32"-40 thread. It is fully adjustable for windage and elevation. The aperture in its lowest position is centered .350" above base. It has .200" of elevation. One (1) Full turn of the elevation screw equals .020" of elevation adjustment. A Half (1/2) turn equals .010" or each graduation equals .0025" of elevation adjustment.* It requires no gunsmithing. NOTE: Due to Ruger Series production changes, the recoil lug slot found on the integral RUGER scope base has been found to vary in width over time. The current recoil post on our RUGER Peep sights is .118" thick. Before placing an order, should you find this recoil slot to be thinner than .118" please call us and we can custom alter the recoil post to fit your rifles lug slot.
Sight Body dimensions: Length w/ Aperture: 1.145", Width: .872", Height: @ .700".
*See the Sight Correction Chart for adjutment required based on the sight radius (spacing) from the front sight to the peep sight.
Product Note: We will be unable to tell you whether this peep sight will work with your existing front sight height. We suggest installing the peep and test firing. This will establish a base line from which we can make sight correction suggestions if in fact they are required.
